The Advme2702 is a 12-bit resolution low-cost analog output board with 16-channel input.
The output range can be set to ±10V, 0 to 5V or 0 to 10V for each channel.
The board is equipped with individual refresh and batch refresh output modes.
Isolation:
Analog circuits and digital circuits are isolated by photo-coupler.
Conversion Features:
Conversion time of 10µs per channel.
When the power is turned on and at other similar times, the output voltage of all channels is forced to 0V. Each channel has a two layer buffer, allowing the output voltage of all channels to be refreshed simultaneously.
Other Features:
It operates from a single +5V power supply by VME bus.
Device driver for VxWorks® is optionally available.
Architecture:
Analog Output:
- 16 channels
- Output range: 0 to 5V, 0 to 10V, ±10V (can be set for each channel)
- Output current: 5mA
D/A Conversion:
- Resolution: 12-bit
- Output mode: Binary
- Overall accuracy: ±0.3% (F.S. at 25°C)
- Conversion time: 10µs per channel
- Temperature characteristics: ±50ppm/°C typical, up to ±100ppm/°C
- D/A converter: two Analog Devices™ AD7568BSZ®
Isolation:
- Method: photo-coupler (between analog and digital circuits)
- Withstanding voltage between output and system: 1500V AC for one minute
Output Connector:
Bus Interface:
- VME bus
- Width complies with A16 D16/D08(EO) Rev.C.3
- Accessible using AM codes 29H and 2DH
RoHS:
Power Supply:
Power Consumption:
Mechanical:
- Dimensions: 6U – 262 x 172 x 20 mm (10.31” x 6.77” x 0.79”)
- Pitch: Single slot – 20.02 mm (0.79”)
- Weight: 265g typical
Operating Temperature:
Humidity:
Operating System Supported:
Options:
- Device driver for VxWorks®