The CPU-1452 is an embedded rugged board based on two modules: a mezzanine CPU module combined with a PC/104-Plus form factor carrier.
This product features the ULV BGA Intel® Celeron™ processor running at 400MHz, a Fast Ethernet interface, four USB 1.1 and four 2.0 ports.
The CPU-1452 is an embedded rugged board based on two modules: a mezzanine CPU module combined with a PC/104-Plus form factor carrier. CPU
The mezzanine CPU module features the Intel® Celeron™ 400MHz processor and the Intel® 815E chipset with 100MHz bus frequency.
Memory
The system comes with 256MB SDRAM soldered onboard.
BIOS
The 1MB Flash BIOS is fully re-programmable onboard. The set-up parameters are saved in the Flash memory for battery-free operation.
Interfaces
The carrier implements a very rich connectivity, including 8 USB ports (4x USB 1.1 and 4x USB 2.0), 1 Fast Ethernet interface (10/100Mbps), 2 Serial ports, Analog VGA and Digital LVDS outputs, 1 AC97 interface, Auxiliary Power, Keyboard and Mouse connectors and an IDE controller that supports any type of IDE Flash device (Disk-On-Module, Compact Flash and Flash Disk).
The carrier also provides the connections for the ISA and PCI bus making it possible to stack the CPU-1452 on top of a PC/104-Plus system. Additionally, the carrier provides support for Watchdog management and Real Time Clock (with external backup battery) and can be customized to match specific customer needs.
Rugged
No active cooling is required to operate within the standard and extended temperature ranges. Conformal coating is optionally available.
Architecture:
CPU:
- Intel® ULV BGA Celeron™ 400 MHz Tualatin 0.13µm, 256KB L2 cache, 100MHz FSB
Chipset:
RAM:
- 256MB SDRAM, soldered onboard
BIOS:
- Eurotech Embedded BIOS
- 1MB Flash EPROM
- BIOS with enhanced embedded features, easy to upgrade and optionally customizable.
- Watchdog management.
- Set-Up in Flash in order to avoid Set-Up corruption in field.
- Virtual Peripheral Support (V.P.S.): this mode allows users to bootstrap from the serial ports and redirect Keyboard, Video and Floppy Disk on the serial ports before booting the Operating System. It is also possible to redirect any of these peripherals by default.
- Etherboot support: this feature allows the system to boot up from a LAN connection for diskless operation.
IDE:
USB:
- 4x USB 2.0 ports and 4x USB 1.1 ports
Network:
- 1x Intel® 82562ET Fast Ethernet Controller
(TP RJ-45 Ethernet Adapter Sold Separately)
Serial Ports:
- 1x RS-232
- 1x RS-232/422/485
Video Controllers:
- Analog VGA output and Digital LVDS output
Audio:
- AC97 Audio CODEC port (Adapter sold separately)
Other Interfaces:
- Keyboard, Mouse
- Auxiliary Power
Watchdog Timer:
Bus:
- PC/104-Plus (PCI)
- PC/104 (ISA)
Power Supply:
Power Consumption:
Power Management:
- Temperature monitor with hardware thermal management circuit
- Power fail NMI (safe operation between 4.75V and 5.25V)
Mechanical:
- Dimensions: 90 x 96 mm (3.6" X 3.8")
- Height: 18.6 mm (0.7"), excluding ISA/PCI connectors
Operating temperature:
- 0 to +50 °C (standard)
- -40 to +85 °C (extended)
- No active cooling is required to operate within the standard and extended temperature range
Humidity:
MTBF:
- 555,000+ hours (MIL-STD-217 @ GB-25°C)
Supported Operating Systems:
- WinCE®, VxWorks®, XP Embedded®, QNX® and Linux®
Options:
- Custom BIOS with embedded features
- Extended operating temperature range
- Custom carrier
- Conformal coating
- Custom connectors
- RJ45 Ethernet Adapter
- AC97 Adapter
- 4x USB Connector Adapter
- 2mm to 2.54mm IDE Cable
- Digital LCD/TFT LVDS Receiver
- Cable Kit
- Development Kit